Εξάρτημα στερέωσης και απορρόφησης δυνάμεων (Διαστολικά - Αντικραδασμικά)
The FIXBLOC χρησιμοποιείται σε σωλήνες PE για τη δημιουργία σταθερού σημείου, ως προστασία από θλιπτικές δυνάμεις, για ενίσχυση της συναρμολόγησης ή στερέωση των σωλήνων. Ισχύς ανά σταθερό σημείο έως 40 KN.
The FIXBLOC is used on PE pipes for the creation of fixed point, as a pull-out protection, assembly aid or fixation to pipe bearing. Strength per fixed point up to 40 KN. Multiple applications possible around the pipe circumference. Processing is carried out with standard tensioning belts with belt width 50mm which are guided securely by two belt clips (easily removable). Minimum length approx. 3,5 x d pipe (longer for multiple applications).
If the belt cannot be passed around the circumference of the pipe, the clamping device FIXBLOC FWFB (see application picture; order no. 613380 only for hire) can be used, e.g. in case of a PE-Liner, which must be anchored against the concrete wall of a manhole.
PE 100
Maximum shear load per FIXBLOC: 40 kN
| Κωδικός προϊόντος | product.detail.attribute.d1Small | BX | PU | L | h1 | B | Weight kg |
|---|---|---|---|---|---|---|---|
| 680600 | 160 - 1600 | 15 | 750 | 220 | 45 | 60 | 0,320 |
Sewage pipe systems are high-value assets of a value which has to be maintained for a long time. Increasing demands on the public sewage system require materials which meet these criteria. HDPE sewage pipes have been fused for many years with the FRIAFIT HDPE sewage system tightly, frictionlocked and root-proof.
Areas of Application
The FRIAFIT FIXBLOC can be used anywhere, where high levels of axial push-pull forces must be absorbed. For example, for pipe reconstructions, when creating fixed points and fixings.
Thanks to its compact construction, exposed heating coils, which ensure optimum heat transfer and the large fusion zone, high levels of push-pull forces of up to 40 kN per FIXBLOC can be absorbed without a problem. When using several FIXBLOCs on the pipe, high levels of forces can also be absorbed.
Assembly Instructions
The assembly of the FRIAFIT FIXBLOC is simple and rapid using a strap or - where the pipe circumference is not accessible - using the FRIATOOLS FIXBLOC FWFB clamping unit.
With strap assembly the FIXBLOC is fitted on the pipe with a standard strap.
When assembling using the FRIATOOLS FIXBLOC FWFB clamping unit, the FIXBLOC can also be clamped from the cut edge of the pipe and be welded. This is particularly useful if the pipe circumference is not accessible, e.g. with a PE liner in a channel, which must be anchored against the shaft wall.
The fusion process is carried out using standard fusion equipment, e.g. using our FRIAMAT.
Good reasons for using the FRIAFIT FIXBLOC
Strength for each fixed point up to 40 kN
Multiple applications around the pipe circumference are possible
Simple processing using standard straps or using the FIXBLOC FWFB clamping unit