Ηλεκτροσύνδεσμος υπό γωνία (αντιστάσεις ενός άκρου)
ια χρήση όπου απαιτείται αλλαγή κατεύθυνσης ακόμη και σε περιορισμένους χώρους. Με εκτεθειμένες αντιστάσεις για βέλτιστη μεταφορά θερμότητας, μεγάλο βάθος διείσδυσης και ευρείες ζώνες συγκόλλησης. Προέκταση που συνεργάζεται με τους συνδέσμους FRIALEN MB και UB.
Little space required thanks to compact design as well as angle spacings of 15°, 30°, 45° facilitate a comfortable pipeline routing. Coupler end with exposed heating coil for optimal heat transfer. Pipe spigots specifically suited for direct fusion into the FRIAFIT sewage saddle ASA TL. Angles of 60°, 90° etc. can be produced by using ABM repeatedly. The smooth, hydraulically optimised internal contour offers a level passage when pipes SDR 17/17.6 are used. The bright surface facilitates an optimal view during camera inspection. With pin indicator for visually checking fusion.
PE 100
Maximum working pressure 2,5 bar
| Κωδικός προϊόντος | w | d | BX | PU | D | L | t | s | Weight kg |
|---|---|---|---|---|---|---|---|---|---|
| 681103 | 15° | 160 | 6 | 48 | 185 | 286 | 92 | 9,5 | 1,660 |
| 681104 | 30° | 160 | 6 | 48 | 185 | 329 | 92 | 9,5 | 1,630 |
| 681105 | 45° | 160 | 6 | 48 | 185 | 325 | 92 | 9,5 | 1,630 |
Sewage pipe systems are high-value assets of a value which has to be maintained for a long time. Increasing demands on the public sewage system require materials which meet these criteria. HDPE sewage pipes have been fused for many years with the FRIAFIT HDPE sewage system tightly, frictionlocked and root-proof.
Areas of Application
The FRIAFIT elbows ABM and ABMS d 160/DN 150 are used for change of direction in sewage and combined sewage water connection lines. The types ABM (coupler/coupler) or ABMS (coupler/pipe spigot) and the angle spacings 15°, 30° and 45° facilitate a comfortable piping configuration. Angles of 60°, 90° etc. can be produced by using multiple elbows. The FRIAFIT elbow ABMS is specifically suited for direct fusion into the FRIAFIT sewage saddle ASA-TL. The FRIAFIT elbows ABM and ABMS have a smooth, hydraulically optimised internal contour for sewage water draining and offer a level passage when used with
pipes SDR 17/17.6. The bright surface facilitates an optimal view during camera inspection. The material used is stabilised against UV radiation.
Notes on processing
The connection of the pipes and fittings with FRIAFIT elbows by FRIAFIT fusion is leak-tight and friction-locked. The PE fusion ends of the pipe or fitting are prepared according to the general installation
requirements (see assembly instructions for the FRIAFIT sewage system) (remove oxide layer/clean). For push-fit connections at the pipe spigot of the FRIAFIT elbow ABMS, insertion depths and wall
thickness differences, if any, are to be considered.
Good reasons for the FRIAFIT elbows ABM / ABMS
• Little space required thanks to compact design
• Reduction of the installation time thanks to
integrated fusion couplers
• Large coupler depths for good guiding of the
pipe or pipe spigot (no fixing devices required)
• Leak-tight, friction-locked and root-proof connection
• Exposed, fixed heating coil for direct heat transfer to the pipe
• Extra-broad fusion zones
• Extra-large insertion depths
• Short fusion times, short cooling down times
• Fusion indicator for visual control of fusion
• Extra-long cold zones before and after the fusion area
• Barcode for fully automatic fusion with HDPE pipes from SDR 33 to SDR 17, taking into
consideration the ambient temperature (temperature compensation)
• Bright component part interior surface for continuous camera inspection
• Hydraulically optimised internal contour through curved form
• Level when using SDR 17/17.6 connecting pipes, no drain obstructions
• Flexible use thanks to types ABM (coupler/coupler) or ABMS (coupler/pipe spigot)
• Elbow angle 15°, 30°, and 45°
• Other elbow angles can be produced by using multiple elbows or combining elbows