Ταφ
Με εκτεθειμένες αντιστάσεις για βέλτιστη μεταφορά θερμότητας, μεγάλο βάθος διείσδυσης, ευρείες ζώνες συγκόλλησης και ζώνες ψύξης στις άκρες και στην μέση του εξαρτήματος για να αποτρέπεται η ροή λειωμένου υλικού, για χρήση χωρίς την ανάγκη μηχανισμών συγκράτησης.
With exposed heating coils for optimal heat transfer on all 3 sides, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Straight passage fusible in one-step, therefore a total of only two fusions necessary.
PE 100 SDR 11
Maximum working pressure 16 bar (water)/10 bar (gas)
| Κωδικός προϊόντος | d | BX | PU | D | L | L1 | t | z | h | B | Weight kg |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 612165 | 75 | 8 | 144 | 96 | 278 | 187 | 62 | 69 | 37 | 111 | 0,980 |
| 612166 | 90 | 10 | 80 | 117 | 305 | 211 | 71 | 74 | 44 | 129 | 1,660 |
| 612167 | 110 | 6 | 48 | 142 | 355 | 248 | 79 | 91 | 48 | 152 | 2,590 |
| 612168 | 125 | 5 | 40 | 160 | 384 | 272 | 79 | 105 | 44 | 168 | 3,500 |
| 615277 | 160 | 3 | 24 | 200 | 430 | 315 | 88 | 119 | 41 | 206 | 5,820 |
| 615691 | 180 | 2 | 16 | 228 | 480 | 354 | 95 | 137 | 62 | 234 | 7,840 |
| 616266 | 200 | 1 | 8 | 251 | 550 | 400 | 109 | 160 | 54 | 255 | 11,130 |
| 615692 | 225 | 1 | 8 | 284 | 580 | 432 | 111 | 172 | 63 | 286 | 13,910 |
| 616412 | 250 | 1 | 4 | 310 | 770 | 540 | 128 | 254 | 80 | - | 28,200 |
| 616413 | 280 | 1 | 2 | 350 | 905 | 630 | 139 | 312 | 84 | - | 42,200 |
| 616414 | 315 | 1 | 1 | 396 | 940 | 670 | 150 | 359 | 80 | - | 58,100 |
Für T d75 - d225 gerader Durchgang in einem Schritt schweißbar, daher insgesamt nur 2 Schweißungen. Für T > d225 getrennte Schweißzonen pro Muffenseite.
FRIALEN-Safety Fittings can be fused to pipes of SDR stages 11 to 17.6. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory. DVGW-Registration No.: DV-8606AU2249
Areas of Application
The FRIALEN T-pieces are used for equal pipe outlets of HD-PE pipelines.
Assembly Instructions
The fusion of the pipe ends with the FRIALEN T-piece takes place by FRIALEN electrofusion – leakproof and longitudinally strong.
The pipe ends are prepared according to the general installation instructions (see “Assembly Instructions for FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends. The FRIALEN-T pieces have a straight passage fusible in one step. Therefore a total of only two fusions are necessary.
Good reasons for using the FRIALEN T-piece:
Large coupler depth for ease of pipe guiding (no holding clamps required)
Extra wide fusion zones
Maximum stability through great wall thickness
Cold zones at the front side and in the middle of the coupler
Exposed heating coil for direct heat transmission to the pipe
Small annular gap for build-up of optimum joining pressure in the fusion zone
Touch proof electric contacts
Durable batch marking
Individually wrapped for dirt protection
Additional barcode for tracing back the underground fitting (Traceability-Coding)