TA RED SDR 11

Ταφ με συστολικό άκρο εξόδου

Με εκτεθειμένες αντιστάσεις για βέλτιστη μεταφορά θερμότητας, μεγάλο βάθος διείσδυσης, ευρείες ζώνες συγκόλλησης και ζώνες ψύξης στις άκρες και στην μέση του εξαρτήματος για να αποτρέπεται η ροή λειωμένου υλικού, για χρήση χωρίς την ανάγκη μηχανισμών συγκράτησης.

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones. Outlet spigot SDR 11 for proccessing couplers UB/MB.

Επιστροφή Τεχνικό Φυλλάδιο

PE 100 SDR 11

Maximum working pressure 16 bar (water)/10 bar (gas)

Κωδικός προϊόντος	product.detail.attribute.d1Small	d₂	BX	PU	D	L1	t	t₁	z	h	B	Weight kg
616417	32	20	30	540	46	117	44	42	14	22	62	0,110
616418	40	32	20	360	55	148	46	51	28	25	70	0,170
616419	50	32	15	270	69	158	55	51	33	28	82	0,300
616420	50	40	15	270	69	167	55	55	33	28	82	0,320
616421	63	32	10	180	84	173	63	51	36	32	96	0,440
616422	63	40	10	180	84	182	63	55	36	32	96	0,450
616423	63	50	10	180	84	197	63	60	36	32	96	0,500

FRIALEN safety fittings can be fused to pipes SDR11 - SDR 17.6. Minimum wall thickness s min ≥ 3 mm. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory. DVGW-Registration No.: DV-8601AU2248 and DV-8606AU2249.

Areas of Application

The FRIALEN reduced TA red pieces are used for pipe outlets of HD-PE pipelines.

Assembly Instructions

The fusion of the pipe ends with the FRIALEN TA red takes place by FRIALEN-fusing – leakproof and longitudinally strong.

The pipe ends are prepared (removing the oxide layer/cleaning) according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”).

Good reasons for using the FRIALEN TA red:

Large coupler depth for ease of pipe guiding (no holding clamps required)

At dim. up to d₁ 63, Length of outlet spigot dimensioned for two fusion operations

Extra wide fusion zones

Maximum stability through great wall thickness

Cold zones at the front side and in the middle of the coupler

Exposed heating coil for direct heat transmission to the pipe

Small annular gap for build-up of optimum joining pressure in the fusion zone

Touch proof electric contacts

Durable batch marking

Individually wrapped for dirt protection

Additional barcode for tracing back the fitting (Traceability-Coding)