Ηλεκτροσύνδεσμοι

Μπορεί να χρησιμοποιηθούν ως μούφα επισκευής. Με εξωτερική θερμαντική αντίσταση για ομοιόμορφη μεταφορά θερμότητας.

Can also be used as repair couplers. With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.

Επιστροφή Τεχνικό Φυλλάδιο

PE 100 SDR 11

Maximum working pressure 16 bar (water)/10 bar (gas)

Κωδικός προϊόντος	d	BX	PU	D	L	t	z	h	B	Weight kg
612680	20	110	3520	33	60	29	2	17	49	0,040
612681	25	90	2880	38	66	32	2	17	54	0,060
612682	32	60	1920	45	78	38	2	21	61	0,070
612683	40	40	1280	54	86	42	2	23	71	0,090
612684	50	25	800	68	98	48	2	27	82	0,150
612685	63	15	480	82	110	55	2	29	96	0,230
612686	75	50	400	98	122	60	3	32	110	0,330
612687	90	30	240	114	157	77	3	51	127	0,440
612688	110	24	192	137	159	78	3	49	152	0,710
612689	125	16	128	156	172	85	3	51	169	0,940
612690	140	12	96	174	184	91	3	52	185	1,270
612691	160	8	64	199	190	94	3	52	207	1,780

FRIALEN safety fittings can be fused to pipes SDR11 - SDR 17.6. Minimum wall thickness s min ≥ 3 mm. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory. DVGW-Registration Nos. DV-8601AU2248 and DV-8606AU2249

Areas of Application

The FRIALEN-coupler MB is used for pipe connections when laying long runs. Additional areas of application:

Integration of adapters into an existing pipe-line

Connection of pipelines with fixed or restraint points

Reinforcement / sealing of localised pipe damage

Reinforcement of pinch points

Assembly Instructions

The fusion of pipe ends with the FRIALEN-coupler MB takes place using FRIALEN-fusing – leakproof and longitudinally strong.

The pipe ends are prepared according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends. Please note that spigot of valves must be at least half as long as the coupler.

Good reasons for using the FRIALEN-Coupler MB:

Large coupler depth for ease of pipe guiding (no holding clamps required)

Extra wide fusion zones

Maximum stability through great wall thickness

Cold zones at the front side and in the middle of the coupler

Exposed heating coil for direct heat transmission to the pipe

Small annular gap for build-up of optimum joining pressure in the fusion zone

Touch proof electric contacts

Fusion indicator for visual fusion control

Durable batch marking

Individually wrapped for dirt protection

Additional barcode for tracing back the fitting (Traceability-Coding)