Spigot Σέλα με έξοδο φλάντζας
Συμπαγής τοποθέτηση σε HD-PE. Συνδυασμός ηλεκτροσέλας, ηλεκτροσυνδέσμου FRIALEN και FRIALEN Full Faced Flanges EFL (συμπαγής φλάντζα). Σέλα με εκτεθειμένη αντίσταση θέρμανσης για βέλτιστη μεταφορά θερμότητας.
Compact fitting in HD-PE. Manufactured combination of FRIALEN spigot saddle, coupler and FRIALEN Full Faced Flanges EFL (compact flange). Saddle with exposed heating coil for optimum heat transfer. Tapping in pressure free condition or, using an additional shut-off valve, under operating pressure by means of standard tapping equipment (we recommend Hütz & Baumgarten (www.huetz-baumgarten.de)). We recommend steel-reinforced elastomeric gaskets.
Additional washers are necessary for the flange reducer.
For tapping under pressure, please contact our hotline: +49 621 486-2325.
PE 100 SDR 11
Maximum working pressure 16 bar (water)
| Κωδικός προϊόντος | product.detail.attribute.d1SmallDN | BX | PU | D | L | B | dk | Z | Ø k | H | b | Drilling Ø da |
Weight kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 616016 | 110/80 | 3 | 54 | 204 | 190 | 165 | 16,5 | 180 | 160 | 296 | 25 | 65 | 3,700 |
| 616017 | 125/80 | 2 | 36 | 204 | 205 | 185 | 16,5 | 180 | 160 | 311 | 25 | 65 | 3,940 |
| 616018 | 160/80 | 2 | 36 | 204 | 245 | 217 | 16,5 | 180 | 160 | 346 | 25 | 65 | 4,320 |
| 616019 | 180/80 | 2 | 36 | 204 | 285 | 241 | 16,5 | 180 | 160 | 366 | 25 | 65 | 4,610 |
| 616020 | 225/80 | 2 | 16 | 204 | 284 | 286 | 16,5 | 180 | 160 | 411 | 25 | 65 | 4,720 |
| 616022 | 160/100 | 2 | 36 | 224 | 245 | 217 | 16,5 | 180 | 180 | 346 | 27 | 84 | 5,270 |
| 616024 | 225/100 | 2 | 16 | 224 | 284 | 286 | 16,5 | 180 | 180 | 411 | 27 | 84 | 5,635 |
FRIALEN-Safety Fittings can be fused to pipes of SDR stages 11 to 17.6. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory. DVGW-Registration No.: DV-8606AU2249
Areas of Application
The FRIALEN Spigot Saddle with Flange Outlet SAFL is used for the integration of flange valves and hydrants up to PN 16.
Assembly Instructions
The saddle of the SAFL is mounted and fused onto the HD-PE mains. Drilling into the HD-PE mains can take place
without pressure in the mains
under operating pressure on application of a gate-valve on the flange side
using standard drill equipment. We recommend Hütz + Baumgarten.
The fusion of the saddle piece with the HD-PE mains takes place using FRIALEN-fusion –leakproof and longitudinally strong. Saddle and HD-PE mains are prepared according to the general installation instructions (see Assembly Instructions for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing oxide skin.
The flange connection measurements correspond to DIN EN 1092-1. Supplementary washers are required.
All standard profile and flat gaskets can be used. Torques advised by the gasket manufacturer must be observed. We recommend profile gaskets of type G-St.
Good reasons for using the FRIALEN-Spigot Saddle with Flange Outlet SAFL:
Compact component from HD-PE
Flange adaptor and flange are one component. They make up one homogeneous unit
Factory made combination of FRIALEN-Spigot Saddle, FRIALEN-Coupler and Full Faced Flange
Smooth on the inside and no fusion bead at the connection between SA and EFL, optimum hydraulics
The cold flowing properties well known with HD-PE are avoided by constructive flange design
Solid construction. Integration of the flange prevents tear-off
Short overall length for horizontal and vertical installation
Top stability due to great wall thickness
Extremely economical solution
Additional barcode for tracing back the underground fitting (Traceability-Coding)