Γωνία ηλεκτροσυγκολλησης 30°
Με εκτεθειμένες αντιστάσεις για βέλτιστη μεταφορά θερμότητας, μεγάλο βάθος διείσδυσης, ευρείες ζώνες συγκόλλησης και ζώνες ψύξης στις άκρες και στην μέση του εξαρτήματος για να αποτρέπεται η ροή λειωμένου υλικού, για χρήση χωρίς την ανάγκη μηχανισμών συγκράτησης.
With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.
PE 100 SDR 11
Maximum working pressure 16 bar (water)/10 bar (gas)
| Κωδικός προϊόντος | d | BX | PU | D | L | t | z | h | B | Weight kg |
|---|---|---|---|---|---|---|---|---|---|---|
| 615272 | 90 | 8 | 144 | 115 | 224 | 72 | 24 | 43 | 123 | 0,780 |
| 615273 | 110 | 6 | 108 | 142 | 252 | 83 | 27 | 47 | 157 | 1,260 |
| 615274 | 125 | 4 | 72 | 158 | 270 | 85 | 30 | 51 | 162 | 1,640 |
| 615340 | 160 | 5 | 40 | 199 | 350 | 96 | 40 | 59 | 198 | 3,870 |
| 616261 | 180 | 3 | 24 | 229 | 390 | 101 | 79 | 57 | 234 | 4,990 |
| 616262 | 200 | 1 | 18 | 254 | 412 | 106 | 84 | 54 | 256 | 6,350 |
| 616263 | 225 | 1 | 18 | 281 | 456 | 123 | 86 | 64 | 282 | 8,220 |
FRIALEN Safety Fittings can be fused to pipes of SDR stages 11 to 17.6. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory. DVGW-Registration No. DV-8606AU2249
Areas of Application
The FRIALEN-Elbow W30° is used for all changes of direction in HD-PE pipes.
Assembly Instructions
The fusion of the pipe ends with the FRIALEN Elbows W30° takes place by FRIALEN-fusing – leakproof and longitudinally strong.
The pipe ends are prepared according to the general installation instructions (see “Assembly Instructions” for “FRIALEN Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends.
Good reasons for using the FRIALEN Elbows W30°:
Large coupler depth for ease of pipe guiding (no holding clamps required)
Extra wide fusion zones
Maximum stability through great wall thickness
Cold zones at the front side and in the middle of the coupler
Exposed heating coil for direct heat transmission to the pipe
Small annular gap for build-up of optimum joining pressure in the fusion zone
Contacts safe to touch
Fusion indicator for visual fusion control
Durable batch marking
Individually wrapped for dirt protection
Additional barcode for tracing back the fitting (Traceability-Coding)