Συστολική φλάντζα
Συμπαγή εξαρτήματα που κατασκευάζεται από HD-PE συστολή και FRIALEN EFL Full Face Flanges. Ειδικά κατάλληλο για την οριζόντια σύνδεση των FRIALEN Ταφ με διαμέτρους DN 80 και DN 100.
Compact fitting manufactured by factory from HD-PE reducer and FRIALEN EFL Full Face Flanges. Specially suited for the horizontal connection of flange valves to FRIALEN T-pieces T for reduced branches in DN 80 and DN 100. For the vertical connection of hydrants using our elbow including foot support WF 90° d 110 or the T-piece T, the installation depth must be taken into consideration. No internal welding bead at the weld seam of the reduction. Steel-reinforced elastomeric gaskets recommended.
Additional washers are necessary.
PE 100 SDR 11
Maximum working pressure 16 bar (water)
| Κωδικός προϊόντος | d | BX | PU | D | t | dk | s | b | Weight kg |
|---|---|---|---|---|---|---|---|---|---|
| 616065 | 110 | 3 | 96 | 204 | 82 | 17 | 10 | 25 | 3,500 |
| 616241 | 160 | 2 | 64 | 224 | 85 | 17 | 14,6 | 27 | 4,060 |
Area of Application
The FRIALEN FLR flange reducer is used as material adapter. In addition, there are specific options for the direct connection of
Flange valves in reduced branches in connection with a FRIALEN T-piece or a FRIALEN Spigot Saddle SA
Hydrants at FRIALEN elbows with base WF 90º - d 110
The compact component ensures that the reduced flange connection is achieved easily, quickly and economically.
For the vertical connection of hydrants with elbows with base unit WF 90° or T-pieces T it is necessary to regard the height of coverage.
The constructive design eliminates the familiar cold flow behaviour of HD-PE around the flange connection. Protective measures against corrosion are not required.
Processing Advice
Fusion of the pipe socket takes place according to the FRIALEN assembly instructions. Flange design according to DIN EN 1092-1. Grommets are required for the flange connections. All standard profile and flat gaskets may be used. We recommend profile gaskets type G-St. Please observe gasket manufacturers’ instructions with regards to screw torque.
Good reasons for FRIALEN FLR flange reducers:
Compact component for material connection and direct reduction
Simple valve integration
Fixed flange for maximum stability
No corrosion measures necessary for FLR
Safe assembly using screws, typical plastic cold flow behaviour eliminated due to intelligent construction
Component traceability through traceability barcode