WUN 90

90° transition elbow HD-PE/brass with external thread

Transition elbow brass pipe WUN 90

  • Water
  • Working pressure: PFA (water) 16 bar
  • Material: PE 100 and brass (EN 12168 - CW617N, thread according to EN 10226-1)
  • Safety technology

Note:

The brass side is anchored as non-detachable and non-rotatable in PE.

Self-sealing, patented sealing geometry without elastomeric seal for utilisation in water areas.

Default: Brass, gunmetal on request.

Other thread dimensions available on request.

Go back Data sheet

PE 100 SDR 11

Maximum permissible working pressure 16 bar (water)

Reference d BX PU D R L t z1 z2 h Weight kg
612120 32 20 1000 47 1" 85 42 21 89 24 0,350
612140 32 20 800 47 1 1/2" 94 42 21 93 24 0,480
612127 40 15 750 58 1" 102 46 27 101 30 0,520
612122 40 15 750 58 1 1/4" 102 46 27 103 30 0,530
612121 40 15 750 58 1 1/2" 102 46 27 104 30 0,560
612119 50 10 500 70 1" 118 53 30 110 30 0,680
612123 50 10 500 70 1 1/4" 118 53 30 112 30 0,660
612124 50 10 500 70 1 1/2" 118 53 30 113 30 0,680
612125 63 10 320 84 1 1/2" 128 53 33 116 35 0,990
612126 63 10 320 84 2" 128 53 33 121 35 1,030

Other thread dimensions on request

FRIALEN safety fittings can be fused with SDR11 - SDR17.6 pipes, minimum wall thickness s minimum ≥ 3 mm. Other levels of SDR can be processed on request. Please note the mandatory labels directly on the product. DVGW test mark issued: DV-7501AU2256

Default: Brass. Gunmetal and V2A on request

Areas of Application

FRIALEN-Transition Elbows WUN 90° are threaded joints as an adaptor from a metal pipe with internal thread to a HD-PE pipe. Joint on the part of HD-PE by FRIALEN-Coupler.

Assembly Instructions

The threaded component must be held with a spanner to prevent it twisting in the HD-PE component. The fusion of the HD-PE side takes place by FRIALEN-fusing – leakproof and longitudinally strong.

The installation of the brass and the HD-PE side has to be prepared according to the general installation instructions (see ”Transition Fittings with threaded connection” in ”Assembly Instructions” for ”FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipe ends.

Good reasons for using the FRIALEN-Transition Elbows WUN 90°:

  • Compact construction

  • HD-PE side with exposed heating element for optimal heat transfer

  • Cold zones at the end to prevent the flow of molten material

  • No holding clamps required

  • Large insertion depth, extra wide fusion zones

  • Brass end permanently anchored in the HD-PE and will not distort

  • Self sealing patented sealing geometry without elastomer seal

  • Additional barcode for tracing back the underground fitting (Traceability-Coding)

Downloads