Sorry, your browser does not support inline SVG.
DAV ACW

Tapping valve DAV RED SNAP, SDR 11 (closing in an anti-clockwise direction)

Tapping valve DAV RED SNAP ACW, SDR 11

  • Gas, water and H2
  • Maximum pressure: Gas 10 bar, Water 16 bar
  • Material: PE 100
  • Quick release mechanism (RED SNAP):
    • Simple and error-free assembly
    • More quality and high security
    • Save 50% of installation time
  • Integrated drill with upper and lower inner stop
  • Maximum 9 turns for opening and closing
  • Safety technology
  • DVGW test mark: DV-6611AU2255

Note:

For this purpose, there is a suitable actuating linkage DBS with KlickFix and foam rubber for wrench size SW14.

The output nominal size 63 / 40 is a solution with reducing socket MR.

Go back Data sheet
Tapping valve DAV RED SNAP, SDR 11 (closing in an anti-clockwise direction)
Tapping valve DAV RED SNAP, SDR 11 (closing in an anti-clockwise direction)
Tapping valve DAV RED SNAP, SDR 11 (closing in an anti-clockwise direction)
Tapping valve DAV RED SNAP, SDR 11 (closing in an anti-clockwise direction)

PE 100 SDR 11

Maximum permissible working pressure 16 bar (water) / 10 bar (gas)

Reference d1 d2 BX PU L t2 z1 z2 z3 B1 B2 SW Drilling
Ø da		 Turns
open/close		 Weight kg
617127 50 32 24 192 177 86 56 125 8 95 136 14 30 7 1,210
617128 63 32 24 192 177 86 63 125 10 108 146 14 30 7 1,210
617129 63 63 20 160 177 115 63 155 10 108 146 14 30 7 1,330
617130 75 32 20 160 177 86 69 125 10 120 146 14 30 7 1,040
617131 90 32 12 96 183 86 76 125 10 137 170 14 30 8 1,210
617132 90 63 12 96 183 115 76 165 10 137 170 14 30 8 1,330
617133 110 32 12 96 183 86 86 125 10 152 170 14 30 8 1,230
617134 110 63 12 96 183 115 86 170 10 152 170 14 30 8 1,360
617135 125 32 12 96 183 86 94 125 10 167 170 14 30 8 1,260
617136 125 63 12 96 183 115 94 170 10 167 170 14 30 8 1,380
617137 140 32 12 96 183 86 101 125 10 170 170 14 30 8 1,230
617138 140 63 12 96 183 115 101 175 10 170 170 14 30 8 1,360
617139 160 32 10 80 208 86 111 130 10 195 186 14 30 9 1,410
617140 160 63 10 80 208 115 111 180 10 195 186 14 30 9 1,550
617141 180 32 10 80 208 86 121 130 10 203 186 14 30 9 1,440
617142 180 63 10 80 208 115 121 180 10 203 186 14 30 9 1,570
617143 200 32 8 64 208 86 131 130 10 205 186 14 30 9 1,440
617144 200 63 8 64 208 115 131 185 10 205 186 14 30 9 1,590
617145 225 32 8 64 208 86 144 135 10 214 186 14 30 9 1,470
617146 225 63 8 64 208 115 144 190 10 214 186 14 30 9 1,620

FRIALEN pressure tapping valves ≤ d 63 are applicable for pipes of SDR level 11 and > d 63 for pipes of SDR level 11 to 17.6. Minimum wall thickness s minimum ≥ 3 mm. Other levels of SDR can be processed on request. Please note the mandatory labels directly on the product. DVGW test mark issued: DV-6611AU2255.

Areas of Application DAV ACW RED SNAP

The FRIALEN-Pressure Tapping Valves DAV ACW RED SNAP (closing in an anti-clockwise direction) are used for branches of unpressurised and pressurised gas and water pipelines. Outlet spigots are prepared for integration of excess flow valves.

Assembly Instructions

The fusion of the HD-PE distribution pipes and the service pipes with FRIALEN-Pressure Tapping Valves takes place by FRIALEN-fusing – leakproof and longitudinally strong.

The saddle and the outlet spigot have to be prepared according to the general assembly instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house service and supply pipes up to d 225”). This involves removing the oxide layer and cleaning the pipe surface covered by the saddle as well as the outlet spigot and the pipe end.

The assembly of the pressure tapping valve with fast clamping mechanism takes place within seconds with the fast clamping lever RED SNAP without additional tools.

For „Open/Close” the pressure tapping valve require 8 to 9 turns, depending to the dimension and design, by using an operating key type E according to DIN 3223.

(The tapping process need less turns, because of the intermediate position of the drill in supplied condition).

Good reasons for using the FRIALEN Pressure Tapping Valves DAV ACW with fast clamping lever RED SNAP:

  • Compact part, solid injection molded body made from HD-PE

  • Simple and reliable assembly without any tool, thanks to the patented fast clamping lever RED SNAP

  • The flexible saddle compensates pipe tolerances and provides always an optimal, uniform buildup of melt pressure during the fusion

  • Fusing and tapping of the main under maximum permitted operating pressure gas/water

  • Simple start-up of the pressure tapping valve because of little tapping forces

  • No preventive measures necessary with regard to corrosion

  • Actuating spindle made from corrosion-resistant steel

  • Swarfless tapping due to rotating punching drill made of stainless steel

  • Punched-out pipe piece fits securely and permanent in the drill

  • Drill with solid upper and lower stop

  • Length of outlet spigot dimensioned for two fusion operations

  • Barcode exposed on fast clamping lever RED SNAP for easy scanning with readerwand or barcode scanner

  • Installation set DBS is continuously telescopic and self supported in any extended position

  • Installation set with a sleeve tube bell with integrated locking function: connects the installation kit firmly to the DAV, unintentional release is prevented

  • A foam rubber ring in the sleeve tube bell prevents dirt from penetrating into the installation set

  • Subsequent tapping with the installation set DBS from the surface box is possible

  • High torques can be transferred because of a solid construction

Downloads

kiwa - product certificate
de get_app en get_app
224.3 KB, PDF
Certificate
kiwa - product certificate

Accessories

<P>Installation kit for tapping valves</P>
DBS
Installation kit for tapping valves